Authorization Codes - Comdial DXP Attendant Manual

GCA70-250

Authorization Codes

Authorization codes give you a walking class of service option. Walking class of
service provides you with the mobility to use your class of service (COS)
features, prime line assignments, and exception numbers on any telephone in the
system. This means that you will not be limited by features that are available to
the particular telephone that you happen to be using.
Authorization codes are associated with your personal intercom number and are
assigned to you by your installer when he or she programs the system. When you
enter your assigned authorization code at any system telephone, the code alerts
the system to make your normal features available to you. Once you access your
telephone features, they remain in effect until any idle time exceeds the authori-
zation code time-out period.
If your telephone includes an installer-programmed LOCK button, you can press
it and then dial your authorization code to deny other users access to lines and
features at your LCD speakerphone.
To activate walking class of service,
•
1. SELECT system telephone to use.
2. PRESS INTERCOM.
3. DIAL
4. DIAL your authorization code.
To lock your telephone,
•
1. PRESS programmed LOCK button.
2. DIAL your authorization code.
NOTE: If you wait longer than two seconds to dial a digit after you press the
LOCK button, that pause, and any others that you might include, becomes
part of the lock code. You must allow for any pauses at any location that you
inserted them in the number string when you unlock your telephone.
To unlock your telephone,
•
1. PRESS LOCK.
2. DIAL our authorization code (remember, include any pauses that
you inserted when you locked your telephone).
Attendant Manual
#08
.
Other Features
79