Tracker Paging System - Comdial DXP Attendant Manual

Other Features

Tracker Paging System

When installed with your system, the Tracker Paging System option allows you
to send call back and parked call messages to Tracker pagers assigned to station
extension numbers. Along with the parked call message, the system parks the
call in orbit for retrieval by the paged party. The type of message that the system
delivers (either alphanumeric or numeric-only) is dependent upon the Tracker
pager model in use at the station.
When outside callers call into a system that has both a Tracker Paging option and
a voice mail option installed, the system gives these callers the option of either
leaving a message or tracking the person that they are calling.
If you have a Tracker pager assigned to your personal intercom number, you can
receive messages that someone else sends you. The system automatically installs
the Tracker pager for your use; however, you can disable it when you do not wish
to receive paged messages and when you leave at the end of your day. Of course,
if you do disable your Tracker pager at the end of your day, be sure to enable it at
the beginning of your next day.
Your LCD speakerphone includes an interactive TRACK button; however, if your
day-to-day operation includes extensive Tracker usage, such as your attendant
function, the installer may include a TRACK button at a programmable button
location.
To track a called party after receiving a ring—no answer,
•
1. MAKE an intercom call to someone AND RE-
CEIVE no answer.
2. SELECT TRACK .
3. HEAR confirmation beep (Tracker page ac-
cepted) OR HEAR busy tone (Tracker page not
accepted).
4. PRESS SPEAKER to end.
To track a called party without first calling them,
•
1. PRESS INTERCOM AND DIAL
2. DIAL extension number.
3. HEAR confirmation beep (Tracker page accepted) OR HEAR
busy tone (Tracker page not accepted).
4. PRESS SPEAKER to end.
72
Calling J Smith
TRACK
Initiating a Tracker Page
*8
.
GCA70-250
CALLBK MSG
Attendant Manual