Paging - Comdial DXP Attendant Manual

Making Calls

Paging

Your system provides an all-call or a zone page feature that you access by dialing
special codes. This arrangement sounds your voice announcement through the
telephone speakers. All-call sounds the announcement through all telephones,
while zone paging sounds the announcement only through those telephones
located in a specific area. Check with your system administrator to determine the
type of paging and access method you should use. If your day-to-day operation
requires that you send many paging announcements, you can program a special
all-call/zone paging button to give quick access to the feature. See the program-
ming section of this user's guide for details.
Your installer can arrange your system with an external paging unit that you
access by pressing a line button or by dialing a special code. This unit sounds the
voice announcement over an external speaker unit. Check with your system
administrator for specific information on how to operate with such an arrange-
ment.
To send a paging announcement,
•
1. LIFT handset.
2. PRESS INTERCOM.
3. DIAL
NOTE: Zone 1 (code
mode.
4. MAKE announcement.
5. REMAIN on line if awaiting a reply (known as a Meet-Me page),
OR HANG UP handset.
At times other telephone users may page you with instructions to meet them on
line. This is known as a Meet-Me page. You can go to the nearest telephone, dial
a code, and be in contact with the paging party.
To reply to a Meet-Me page,
•
1. LIFT handset of nearest telephone.
2. PRESS INTERCOM.
3. DIAL
4. MEET paging party on line.
36
70 77
through
70
) provides an all-call function in the default
78
.
for zones 1–8.
GCA70-250
Attendant Manual