6.6 – Replacing the Fan Motor :
1. Using a Medium Size Screwdriver, remove the screw attaching the Fan Set;
2. Disconnect the electrical terminals from the Fan Set and replace it;
Note: See the Fan Set Figure.
6.7 – Replacing the Temperature Sensor:
In the need of replacing the TEMPERATURE SENSOR, use the SENSOR KIT (code 326.005.854),
consisting of 1 TEMPERATURE SENSOR, 2 CONNECTORS, 1 screw and 1 tying strap.
MSEX0025_rev01
Damper
Air Diffuser
Housing
Suplement
Damper
Air Diffuser
Diffuser
Cover
Damper
Knob
23