Evaporator Fan Motor
The Evaporator fan motor can be tested with an
ohmmeter set on the Rx1K scale.
To test the Evaporator Fan Motor:
1. Disconnect the wire connectors from the
fan motor terminals.
2. Place the probes on the two outer
terminals of the fan motor.
4. The VOM should read approximately 1,100 ohms.
5. Set the VOM to the highest scale to check for shorted windings.
Place one probe on one of the outer terminals and the other probe
on the motor housing. Then touch the probe to the other outside terminal. In both cases
the meter should show an open circuit.
82