4)
To remove the doors use a large srewdriver to loosen the screws
attaching the upper hinge, lower hinge , intermediate
hinge and intermediate hinge complement
5)
Install the lower hinge on the left side;
6)
Using a large phillips wrench, open one hole (using impact) on the left side bottom End Cap
refrigerator door, at the place indicated
7)
Install the left Stop Bushing on the left-hand, that was ordered
8)
Remove the right Stop Bushing and connect on the right side (bottom End Cap
Refrigerator Door ) the plug that was ordered
MSEX0025_rev01
29