Installation; Installation Of The Sprocket To The Hub; 7-Gear Hub / 5-Gear Hub - Shimano Nexus Inter-8 Dealer's Manual

INSTALLATION

List of tools to be used
The following tools are required to assemble the product.
Shifting lever
Cassette joint
„ Installation of the sprocket to the hub
< 7-gear hub / 5-gear hub >
Place right hand dust cap onto the driver on the right side of
the hub body.
Next, install the sprocket and secure it in place with the snap
ring.
Specifications
Outward
assembling
7-gear 16T - 23T
5-gear
Where to use
Hub nut
Brake lever
RAPIDFIRE Plus
Cover fixing screw
REVOSHIFT
Cover fixing screw
Inner cable fixing bolt unit
Applicable sprockets
Inward
assembling
18T - 23T
16T - 23T
Tool
Adjustable wrench
5 mm Allen key
5 mm Allen key
Screwdriver (#2)
3 mm Allen key
Screwdriver (#1)
TL-CJ40 (Y70898020)
Note the
direction
9
Snap ring
Sprocket
7-gear: Right hand dust cap C
5-gear: Right hand dust cap D
Driver