Shimano Nexus Inter-8 Dealer's Manual page 24

4.
After checking that the end of the outer casing is sitting securely in the cable adjustment bolt of the shifting lever, attach
the inner cable fixing bolt unit to the inner cable.
When installing the inner cable fixing bolt unit, use the setting tool TL-CJ40 (Y70898020).
For CJ-NX40 and CJ-8S40, use the back side of TL-CJ40. Replace the nut fitting as shown in the illustration.
Note:
TL-CJ40 is shipped ready to be used for CJ-NX10 and CJ-8S20.
For use with CJ-NX40 and CJ-8S40, replace the nut fitting on the back side as shown in the illustration.
Inner cable fixing bolt unit
Note:
This inner cable fixing bolt unit is
designed only for CJ-NX10, CJ-NX40,
CJ-8S20, and CJ-8S40.
11-speed fixing bolt units cannot be
used.
10 mm
Pass the inner cable through the hole.
Nut fitting
Inner cable fixing nut
(Black)
Inner cable fixing washer
(Silver)
Inner cable fixing bolt
(Silver)
Back side
TL-CJ40
Pull the inner cable while attaching
the inner cable fixing bolt unit.
Tightening torque:
3.5 - 5.5 N·m {31 - 48 in. lbs.}
24
127 mm
63 mm or less 63 mm or less