8-Gear Hub / 5-Gear Hub - Shimano Nexus Inter-8 Dealer's Manual

< 8-gear hub / 5-gear hub >
1.
Install the driver cap to the driver on the right side of the hub body.
Snap ring
Sprocket
2.
Turn the cassette joint pulley in the direction of the arrow in the illustration to align the red
bracket. With the cassette joint in this condition, install it so that the red
mark on the right side of the hub body.
Align the red marks
to install.
Align the red Align the red marks marks
to install. to install.
3.
Secure the cassette joint to the hub with the cassette joint fixing ring. When installing the cassette joint fixing ring, align the
yellow mark with the yellow
Align the yellow
marks to install.
Cassette joint pulley
Install the driver cap in
this position.
Cassette joint
Right side of the hub body
mark on the cassette joint pulley, and then turn the cassette joint fixing ring 45° clockwise.
Cassette joint fixing ring
Driver cap
Driver
mark on the cassette joint is aligned with the red
Should be aligned
Fit the cassette joint
bracket securely.
12
Note the
direction
marks on the pulley and the
Cassette joint pulley
Cassette joint bracket
Turn 45°
Cassette joint fixing
ring