ADJUSTMENT
Adjusting the cassette joint
1.
Set the REVOSHIFT lever / shifting lever to
REVOSHIFT
< REVOSHIFT Lever >
1
Set to
2.
Set the REVOSHIFT lever / shifting lever as shown in the illustration.
REVOSHIFT
< REVOSHIFT Lever >
4
7-gear/8-gear hub: Set to 4
5-gear hub: Set to 3
Check that the yellow setting lines on the cassette joint bracket
and pulley are aligned with each other at this time. If the
overlapping area falls short of two thirds of each setting line, the
gears may not be properly engaged during pedaling, resulting in
abnormal noise or free spinning of the pedals.
• The yellow setting lines on the cassette joint are located in two places. Use the one that is easiest to see.
1
.
1
RAPIDFIRE Plus
< Shifting Lever >
Set to
RAPIDFIRE Plus
< Shifting Lever >
7-gear/8-gear hub: Set to 4
5-gear hub: Set to 3
The overlapping area falls short
of two thirds of each setting line.
27
1 .. 4 .. 7
1
1 .. 4 .. 7
Yellow setting lines