Inter - Shimano Nexus Inter-8 Dealer's Manual

For Installation to the Bicycle, and Maintenance:
• The cassette joint should only be used with sprockets from 16T to 23T.
• It is recommended that the chain ring of the front be set to the following gear ratio.
7, 8-gear: about 2.1
5-gear: about 2.0
Example) In the case of 26 inch wheels
Front
Rear
• In order to maintain proper performance of the product, it is recommended that you ask the place where you purchased the
bicycle or your nearest Pro shop to carry out maintenance such as greasing the internal parts about once every two years from
the first time of use (once about every 5,000 km if the bicycle is used very frequently). It is also recommended that you use the
Shimano internal hub grease or lubrication kit when carrying out maintenance. If the special grease or lubrication kit is not
used, problems such as gear shifting malfunction may occur.
• If the wheel becomes stiff and difficult to turn, you should lubricate it with grease.
• You should periodically wash the chainrings in a neutral detergent. In addition, cleaning the chain with neutral detergent and
lubricating it can be an effective way of extending the useful life of the chainrings and the chain.
• If the chain keeps coming off the sprockets during use, replace the sprockets and the chain.
< Coaster brake specifications >
• Use a wheel with 3x or 4x spoke lacing. Wheels with radial lacing cannot be used because the spokes and the wheel can be
damaged when applying the brakes and brake noise can be generated.
• If the wheel becomes stiff and difficult to turn, you should replace the brake shoes or lubricate with grease.
• Use only the dedicated grease for the brake shoes. When using a lubrication kit, remove the brake shoes to avoid contact with
the oil.
The actual product may differ from the illustration because this manual is intended chiefly to explain the procedures for
using the product.
36T
7, 8-gear 16T
5-gear 18T
38T
18T
19T
8
46T
22T
23T