Installation Of The Cassette Joint To The Hub; 7-Gear Hub - Shimano Nexus Inter-8 Dealer's Manual

„ Installation of the cassette joint to the hub
< 7-gear hub >
1.
Install the driver cap to the driver to the right side of the
hub body. Next, turn the cassette joint pulley in the
direction of the arrow so that the yellow
with the yellow mark, and then align the yellow
on the cassette joint with the yellow
side of the hub body.
Snap ring
Sprocket
2.
Secure the cassette joint to the hub with the cassette joint fixing ring. When installing the cassette joint fixing ring, align the
yellow mark with the yellow
Align the yellow
marks to install.
Cassette joint pulley
mark is aligned
marks on the right
Install the driver cap in
this position.
mark on the cassette joint pulley, and then turn the cassette joint fixing ring 45°clockwise.
Cassette joint fixing ring
Should be
aligned
marks
Note the
direction
11
Pulley
Yellow Yellow marks
Driver cap
Yellow marks
Turn 45°
Cassette joint fixing
ring
Fit the cassette joint
bracket securely.
Cassette joint
Driver