Maintenance; Disconnecting The Shifting Cable When Removing The Rear Wheel From The Frame; In The Case Of Cj-Nx10/Cj-8S20 - Shimano Nexus Inter-8 Dealer's Manual

MAINTENANCE

„ Disconnecting the shifting cable when removing the rear wheel from the
frame
< In the case of CJ-NX10/CJ-8S20 >
Disconnect the cable from the cassette joint when removing the rear
wheel from the frame.
1.
Set the REVOSHIFT lever / shifting lever to
REVOSHIFT
< REVOSHIFT Lever >
1
Set to
2.
Pull the outer casing out from the outer casing holder of the
cassette joint, and then remove the inner cable from the slit in the
bracket.
1
.
1
RAPIDFIRE Plus
< Shifting Lever >
Set to
Bracket
Slit
29
Cassette joint
1 .. 4 .. 7
1
Outer casing holder