Operation - Agilent Technologies 1260 Infinity User Manual

Never operate your instrument from a power outlet that has no ground connection. Never
WA R N I N G
use a power cord other than the
region.
Never use cables other than those supplied by
WA R N I N G
functionality and compliance with safety or EMC regulations.

Operation

Before applying power, follow the installation instructions. Additionally the
following must be observed.
Do not remove instrument covers when operating. Before the instrument is
switched on, all protective ground terminals, extension cords,
auto-transformers, and devices connected to it must be connected to a
protective ground socket. Any interruption of the protective grounding will
cause a potential shock hazard that could result in serious personal injury.
Whenever it is likely that the protection has been impaired, the instrument
must be made inoperative and be secured against any intended operation.
Any maintenance of the instrument under voltage should be avoided.
Do not replace components of the instruments with power turned on.
Do not operate the instrument in the presence of flammable gases or fumes.
Operation of any electrical instrument in such an environment constitutes a
definite safety hazard.
Do not install substitute parts or make any unauthorized modification to the
instrument.
HPLC-Chip Cube Interface User's Guide
Appendix A Safety Information
Agilent Technologies
power cord designed for your
Agilent Technologies
Safety Information
to ensure proper
89
8