Safety Information; Power Cords - Agilent Technologies 1260 Infinity User Manual

8 Appendix A Safety Information

Safety Information

Safety Information

The following general safety precautions must be observed during all phases of
operation, service, and repair of the G4240A Chip Cube.
All safety instructions should be read and understood before installation,
operation and maintenance of the instrument. Failure to comply with these
precautions or with specific warnings elsewhere in this manual violates safety
standards of design, manufacture and intended use of the instrument.
Agilent Technologies assumes no liability for the customer's failure to comply
with these requirements.
A warning alerts you to a situation that could cause physical injury or damage to the
WA R N I N G
equipment. Do not proceed beyond a warning until you have fully understood and
met the indicated conditions.
A caution alerts you to situations that could impair
C A U T I O N
functionality or performance and lead to loss of data. Do not proceed beyond a
caution until you have fully addressed the indicated conditions.
Instrument Safety
N O T E
This is a Safety Class I instrument (provided with a terminal for protective grounding) and
has been manufactured and tested according to international safety standards.

Power Cords

Different power cords are offered as options with the G4240A Chip Cube. The
female end of all power cords is identical. It plugs into the power-input socket
at the rear of the instrument. The male end of each power cord is different and
designed to match the wall socket of a particular country or region.
88
G4240A Chip Cube
HPLC-Chip Cube Interface User's Guide