Unpacking The Agilent G4240A Hplc-Chip Ms Interface; Damaged Packaging; Delivery Checklist - Agilent Technologies 1260 Infinity User Manual

4 Installation

Unpacking the Agilent G4240A HPLC-Chip MS Interface

Unpacking the Agilent G4240A HPLC-Chip MS Interface
If you need to ship the HPLC-Chip Cube MS Interface (G4240A) at a later time, always
C A U T I O N
use the plastic shipping pad, tighten the stages assembly down with a tie-wrap, lock
the chip feeder and fix the stages assembly horizontally with the plastic wedges.

Damaged Packaging

When receiving your G4240A HPLC-Chip/Ms Cube, inspect the shipping
containers for any signs of damage. If the containers or cushioning material
are damaged, keep them until the content has been inspected for completeness
and the G4240A Chip Cube has been checked mechanically and electrically. If
the shipping container or cushioning material are damaged, notify the carrier
and keep the shipping material for inspection by the carrier.
If there are signs of damage to the instrument, please do not attempt to install it.
C A U T I O N

Delivery Checklist

Check that all parts and materials have been delivered with the HPLC-Chip
Cube MS Interface (G4240A). Compare the shipment content with the
checklist included in each instrument box. Please report missing or damaged
parts to your local Agilent Technologies sales and service office.
38 HPLC-Chip Cube Interface User's Guide