User-Key Programming; To Program A User Key; To Play Back (Execute) The Stored Keystrokes; To Erase The Stored Keystrokes - Agilent Technologies 7890 Series Advanced Operation Manual

User-Key Programming

To program a User Key

To play back (execute) the stored keystrokes

To erase the stored keystrokes

Advanced Operation Manual
The two User Keys create macros (sets of frequently used
keystrokes) and assign them to single keys. A macro is
executed when the User Key is pressed.
The stored keystrokes may be any keys except [Start], [Prog],
[User Key 1], or [User Key 2].
This discussion assumes that you wish to program [User Key
1]. The process is the same for [User Key 2].
Press [Prog]. Press [User Key 1].
1
Press up to 31 keys, then press [User Key 1]. The
2
keystrokes are stored.
Press [User Key 1].
Press [Prog][User Key 1][User Key 1]. This creates an "empty"
macro.
1
Programming
17