6
Valves
Valve temperature programming
Configuring an Aux thermal zone
216
Most valve applications are isothermal; however, you can
define three temperature ramps if desired. Press [Aux Temp
#], then [1] or [2]. Program this ramp the same as an oven
ramp. Refer to
"Setting the oven parameters for ramped
temperature"
on page 152 for more information.
To configure a thermal Aux zone (1 or 2), press [Config][Aux
Temp #], then [1] or [2]. Press [Mode/Type], then select the
type of device to be controlled. Press [Enter].
Advanced Operation Manual