Adding Events To The Clock Table; Editing Clock Time Events; Deleting Clock Time Events - Agilent Technologies 7890 Series Advanced Operation Manual

1
Programming

Adding events to the clock table

Editing clock time events

Deleting clock time events

16
Press [Clock Table].
1
Press [Mode/Type]. When entries are added, they are
2
automatically ordered chronologically.
3 Select the event type.
Set appropriate parameters.
4
Repeat this process until all entries are added.
5
Press [Clock Table] to view all events programmed.
1
Scroll to the event you want to change.
2
To edit the time for an event, move the cursor to the line
3
labelled Time: and type the desired time.
To edit a setpoint value, scroll to the setpoint item. Press
4
[On/Yes] or [Off/No], or enter a numerical value for the
setpoint.
Press [Clock Table].
1
Use [Delete] to remove events from the clock time table.
2
You will be asked to confirm the deletion.
Press [On/Yes] to delete the current timed event; press
3
[Off/No] to cancel this operation.
To delete the entire table, press [Delete][Clock Table].
Advanced Operation Manual