DA70S/DA75S (WS71/WS76) Parts Removal
5.17 Motor
Drive Belts
and Main
Motor
DA50S/DA55S/DA70S/DA75S AddressRight™ Printers Service Manual
1. Remove operator lower side cover (see section 5.11).
2. Loosen idler and rotate to relieve pressure (tighten to keep belt loose).
3. Remove motor drive belt.
Motor Drive Belt Plate
4. Remove large metal pulley (see photo below) and nylon washer used for
motor drive belt (5/16" allen used). Remove motor drive belt.
5. Remove six phillips screws holding motor drive belt plate (see photo below).
6. Remove four allen screws (circled in photo below) holding motor to motor
drive plate.
7. Remove input side lower cover.
8. Back out motor through opening in input side.
Removal & Replacement • 5
Main Drive Idler
Large Metal Pulley
and Motor Drive Belt
Motor Drive
Plate
Motor Mount Screws
5-21