5 • Removal & Replacement
DA70S/DA75S (WS71/WS76) Parts Removal
5.17 Motor
Drive Belts
and Main
Motor
(continued)
5-22
9. Disconnect encoder harness (ENC) at motor and J2 from main board and
remove main motor.
10. Remove e-clip and wave washer from inside side frame holding the jack
shaft to frame.
11. Unplug cable to encoder (ENC).
12. Remove main drive belt (see photo above).
SV61831 Rev. A DA50S/DA55S/DA70S/DA75S AddressRight™ Printers Service Manual
Main Drive Belt
Encoder Cable