Pitney Bowes DA50S Service Manual page 90

Appendix A • Printer Control Panel Menus and Utilities
A.3 LCD Main
Menu
✍
TIP: The printers have
the ability to hold 20
job presets in memory.
This eliminates the
need for changing
printer setup when
changing print jobs.
✍
TIP: The image over-
lay feature allows you
to "capture" an im-
age from another job
or print file, save it to
memory, and then print
it ("overlay") the image
on the envelope with
your print job that may
contain, say, addresses
only. This way, you can
add (print) that image
on every envelope in
a job without having
to set up the graphic
in an envelope design
program (such as En-
velope Designer Plus).
Mostly used in a non-
Windows environment.
A-8
6. Clear Counter
Submenu Option Settings
Clear address Yes, No
(pcs) counter?
(yes/no)
7. Job Settings
Submenu Option Settings
Entry of job
A. Load
number (from
1 - 20)
Entry of job
B. Save
number (from
1 - 20)
8. Image Overlay
Submenu Option
A. Capture Overlay
B. Clear Overlay
C. Print Overlay
SV61831 Rev. A DA50S/DA55S/DA70S/DA75S AddressRight™ Printers Service Manual
What It Does
Allows you to clear the address piece count
accumulating in the printer's memory.
What It Does
Allows you to retrieve (by a number) a previ-
ously saved job setup.
NOTE: The first 14 characters of the job
name are displayed below the job number.
The job name is optional and is entered via
the control panel application.
Allows you to save the current setup configu-
ration (printer settings) as a job number (1
through 20). Keep a record of these configu-
rations and the assigned number for each
configuration.
Settings What It Does
Yes, No When YES is selected, the printer is set to
use the next page received from the host
computer as an overlay. The "Next page will
be used as overlay" message is displayed for
two seconds, and you return to Image Over-
lay sub-menu. If NO is selected, you return
to Image Overlay sub-menu.
Yes, No When YES is selected, the printer clears the
overlay memory buffer. The "Overlay has
been cleared." message is displayed for two
seconds, and you return to Image Overlay
sub-menu. If NO is selected, you return to
the Image Overlay sub-menu.
Enabled, Allows you to turn the overlay feature ON or
Disabled OFF.