Pitney Bowes DA50S Service Manual page 66

5 • Removal & Replacement
DA70S/DA75S (WS71/WS76) Parts Removal
5.20 Shuttle
Head Motor,
Print Head
Board,
Shuttle Head
Drive Belt
5-24
1. Remove non-operator side cover (see section 5.11).
2. Remove phillips screw with nylon washer (circled below) holding u-channel.
3. Unfasten J3 and J4 flat gray cables, J18 sensor harness, J5 (motor har-
ness), and J6 from main board.
4. Slide out u-channel assembly from non-operator side access.
5. Remove print head, motor, and print head board as necessary from u-
channel assembly.
Print Head
SV61831 Rev. A DA50S/DA55S/DA70S/DA75S AddressRight™ Printers Service Manual
U-Channel Assembly
Print Head Motor
Print Head Board