Pitney Bowes DA50S Service Manual page 99

Printer Control Panel Menus and Utilities • Appendix A
A.4 LCD Setup
Menu
*The Bundle Break
and Tray Break
features are not
functional at the time
of this writing but are
planned for a future
release.
DA50S/DA55S/DA70S/DA75S AddressRight™ Printers Service Manual
13. Tray Break*
Submenu Option Settings
Enabled,
A. Enable/Disable
Disabled
! " # $ % &
B. Break Charac-
' ( ) * + , -
ter
. / 0 through
9 : ; <
= > ? @ A
through Z
1 to 12
C. Break Charac-
ter Count
Vertical or
D. Character Ori-
Horizontal
entation
Before Ad-
E. Break Location
dress, After
Address
Enabled,
F. Print Break
Disabled
Characters
0 to 30.00
G. Break Pause
seconds ( in
Time
0.25 second
increments)
14. Low Ink Warning
Submenu Option Settings
Enabled,
A. Display Warn-
Disabled
ing
2 to 7 percent
B. Warning
(in 1 percent
Threshold
increments)
Enabled,
C. Stop When
Disabled
Empty
What It Does
Allows you to enable or disable the detection
of printer tray breaks. The system will detect
these breaks based on strings of characters
found in the data stream.
Allows you to specify the break characters
used to identify the tray break.
Allows you to specify the number of break
characters in the tray break.
Allows you to specify the alignment of the
break characters as either vertical or hori-
zontal.
Allows you to specify whether to print the
break characters before or after the address.
Allows you to specify whether to print or not
print the break characters.
Allows you to specify the length of time the
printer will pause printing when a tray break
is detected.
What It Does
Allows you to set whether the printer pro-
vides a low ink warning when the ink thresh-
old is reached.
Allows you to set the ink threshold (in
percentage of ink remaining) for the low ink
warning to display.
Allows the printer to stop when the ink has
been depleted (0 percent remaining).
A-17