Pitney Bowes DA50S Service Manual page 58

5 • Removal & Replacement
DA70S/DA75S (WS71/WS76) Parts Removal
5.11 Covers
(continued)
5-16
7. Remove two screws on top and two (5/64") on bottom for lower input
cover.
8 Tip printer on its side and remove six allen screws (5/64") for bottom
hatch cover.
9. Remove six phillips screws for lower output cover (two on each side, two
on face). Remove one allen head, recessed on side.
10. Remove remaining allen head on operator side, then two allen heads on
non-operator side to remove top cover, output side.
SV61831 Rev. A DA50S/DA55S/DA70S/DA75S AddressRight™ Printers Service Manual
After Removal
of Bottom Lower
Input Cover
After Removal
of Bottom
Hatch Cover
After Removal
of Lower Output
Cover