Wacker Neuson DPU 4545 Operator's Manual page 37

1. Remove the protective cage.
2. Remove the battery cover and disconnect the positive terminal cover.
NOTICE
First disconnect negative terminal, then positive terminal.
3. Disconnect starter battery.
4. Lift out defective starter battery and remove battery protection support.
5. Attach battery protection support to the new starter battery.
6. Insert the new starter battery.
7. Attach the positive terminal cover.
NOTICE
First connect positive terminal, then the negative terminal.
8. Connect starter battery.
2
1
Item Designation
1 Positive terminal cover
NOTICE
Before installing the battery cover, ensure that the positive terminal cover is attached.
When assembling the starter battery, pay attention to the coiled helix cable.
9. Attach the battery cover.
10.Attach the protective cage.
100_0202_mt_0008.fm
Item Designation
2 Coiled helix cable
9 Maintenance
37