Installation - Elba 345-004 Instructions For The Use

Touch control induction cooking hobs
Table of Contents

Advertisement

4

INSTALLATION

IMPORTANT :
This appliance shall only be serviced by authorized personnel.
This appliance is to be installed only by an authorised person according to the
current local regulations and in observation of the manufacturer's instructions.
Incorrect installation, for which the manufacturer accepts no responsibility, may
cause personal injury of damage.
Always disconnect the cooktop from mains power supply before carrying out any
maintenance operations or repairs.
WARNING !
We would point out that the adhesive which bonds the plastic laminate to the furniture
must withstand temperatures not less than 150 °C to avoid delamination.
The appliance must be housed in heat resistant units.
The walls of the units must be capable of resisting temperatures of 75 °C above room
temperature.
A
57 mm
bottom of cooktop
(1): at least 50 mm between the back
side of the cut-out and the back
of the countertop.
18
Advice for
the installer
from the top of
countertop to
Fig. 4.1
A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents