Elba 345-004 Instructions For The Use page 19

Touch control induction cooking hobs
Table of Contents

Advertisement

This cooktop can be built into a wor-
king surface 30 to 50 mm thick and
600 mm deep.
In order to install the ceramic hob into
the kitchen fixture, a hole with the di-
mensions shown in figure 4.1 has to
be made, keeping in consideration
the following:
The cooktop shall not be instal-
led directly above a dishwasher,
fridge, freezer, washing machine
or clothes dryer, as the humidity
may damage the cooktop elec-
tronics.
If the cooktop is installed above
an oven, the oven shall be pro-
vided with cooling fan. The two
appliances should be connected
to the electrical supply with inde-
pendent connections.
IMPORTANT WARNING! This
cooktop
requires
supply of fresh, cool air to ful-
ly function. The base of the co-
oktop must have direct unrestricted ventilation to the room where the cooktop is
installed. Follow the requirements of figure 4.3a or 4.3b.
There must be a distance of at least 650 mm between the hob and any wall cupboard
or extractor hood positioned immediately above (see fig. 4.2).
The coatings of the walls of the unit or appliances near the cooktop must be heat
resistant.
Do not install the appliance near inflammable materials (eg. curtains).
Oven with
cooling fan
min 30 mm
Minimum clearances and
ventilation requirements
(oven installed below)
60 mm minimum
adequate
between the side of the
cut-out and the side wall
Fig. 4.3a
min 5 mm
min 30 mm
Minimum clearances and ventilation
requirements (cupboard space below)
IMPORTANT: a drawer is not
admitted below the cooktop
Fig. 4.2
Fig. 4.3b
min 5 mm
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents