Table of Contents
Advertisement
1
INSTALLATION
TECHNICAL INFORMATION FOR THE INSTALLER
In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown
in fig. 1.1a has to be made, bearing in mind the following:
•
A 30mm ventilation gap must be provided between the bottom of the appliance and
any cabinetry, draw unit or appliance.
•
If the base of the cooktop is accessible through a cupboard or drawer space after
installation, a thermal protection barrier is not required.
•
If the cooktop is installed above an oven, the two appliances shall be connected to the
gas and/or electrical supply with independent connections.
•
The cooker top must be kept no less than 100 mm away from any side wall (from side
edge of cutout - figs. 1.1a, 1.1b).
•
The hob must be installed at least 50 mm from the wall (from rear edge of cutout - fig.
1.1a).
•
There must be a distance of at least 650 mm between the hob and any wall cupboard
or extractor hood positioned immediately above (see fig. 1.1b).
Do not install the appliance near inflammable materials (eg. curtains).
9
9
Advertisement
Table of Contents
