Installation; Technical Information For The Installer - Elba ES60-310 XD Instructions For The Use

1

INSTALLATION

TECHNICAL INFORMATION FOR THE
INSTALLER
In order to install the cooker top into the
kitchen fixture, a hole with the dimensions
shown in fig. 1.2 has to be made, bearing in
mind the following:
•
within the unit, between the bottom of the
cooktop and the upper surface of a shelf
there must be a clearance of at least 30
mm. It is absolutely essential that you
place a separator between the base of
the cooktop and the built-in unit or the
oven;
•
the cooker top must be kept no less than
200 mm away from any side wall (fig.
1.2);
•
the hob must be installed at least 60 mm
from the wall;
•
there must be a distance of at least
650 mm between the hob and any wall
cupboard or extractor hood
positioned immediately above
(see fig. 1.1);
•
if the hob is installed over a
built-in oven, there must be
a distance of at least 30 mm
between the two appliances.
The two appliances shall be
connected to the gas /electrical
supply with
connections.
INSTALLATION IN KITCHEN
CABINET WITH DOOR
It is recommended that a 30 mm clearance
be left between the cooker top and the
fixture surface (fig. 1.3).
independent
(fig. 1.3)
Fig. 1.1
Fig. 1.2
Clearance
Door
Space for
connections
Fig. 1.3
11