Installation - Elba EGH-K8942G Owner's Manual

These instructions have been drawn up for your safety and that of others. You
are therefore requested to read them carefully before installing and using the
appliance. Keep this instruction manual for future reference as necessary. If
the appliance is sold or moved, make sure that the manual is handed over to
the new user.

INSTALLATION

Installation of the appliance and its connection to the gas supplies must only
be carried out by qualified technician. It is important to check that the
appliance is connected completely to the gas supplies before using.
- It is risky to modify or attempt to modify the characteristics of this product.
- After removing the appliance from the packaging, make sure that it is not
damaged and in perfect condition. Otherwise, please contact your dealer
before installing the appliance into operation.
- The manufacturer declines all responsibility in case of failure to comply
with the accident prevention regulations.
- Make sure that air is able to circulate freely around the appliance. Installing
the appliance into the built-in cabinet must provide sufficient moving air
flow at the bottom of the appliance to avoid hazard.
- Prior to installation, ensure that the local distribution conditions (nature of
the gas and gas pressure) and the adjustment of the appliance are
compatible.
- Use of a gas cooking appliance produces heat and moisture in the room in
which it is installed. Ensure that the room is well ventilated by keeping the
air intakes open or by installing an extractor hood with discharge pipe.
- If the appliance is used intensively for a long time the effectiveness of the
ventilation will have to be increased, for example by opening a window or
increasing the power of any electric extractor fan.
- Make sure the cabinet or the bottom of the hob is well ventilated and not in
a complete closed compartment.
- After installation, please ensure no gas leakage is detected before using
the appliance.