Avery Weigh-Tronix ZM303 User Instructions page 74

Supervisor menu
3.
4.
5.
6.
7.
8.
9.
10.
The indicator can be configured to work as a remote display with other compatible
indicators or the GSE 350/355IS.
Settings in two password protected menus must be made to configure the indicator for
remote display operation. Contact your local Avery Weigh-Tronix representative for
information on setting up the indicator as a Primary or Secondary indicator.
74
Press UNITS to toggle between the choices and press ZERO to accept the
displayed choice ...
EnAbLE is displayed.
Press UNITS ...
ModE is displayed. Choices are 350iS or rd4000. Choose which type of
remote display protocol to receive.
Press SELECT ...
The current setting is displayed.
Press UNITS to toggle between the choices and press ZERO to accept the
displayed choice ...
ModE is displayed.
Press UNITS ...
bindFwd is displayed. Choose which port will be used for printing/
communication forwarding from the Main indicator. Choices are Port 1,
Port 2, Enet1 through Enet 5.
Press SELECT ...
The current setting is displayed.
Press UNITS to scroll through the choices and press ZERO to accept the
displayed choice ...
bindFwd is displayed.
This completes the Supervisor menu for the Remote Display application.
Repeatedly press TARE until the indicator returns to normal weighing mode.
The current weight value is displayed.
ZM303 Indicator User Instructions