Tare; Tare Register 1-10 - Avery Weigh-Tronix ZM303 User Instructions

Supervisor menu
25.
26.

7.1.2 Tare

Super  Setpoint  Tare
1.

Tare Register 1-10

Tare  Edit  Tare 1-10
2.
3.
4.
If the active unit of measure is lb-oz then tare weights must be entered in the oz
equivalent. To enter 2 lb 4.5 oz you would need to enter 36.5 oz (2 lb = 32 oz plus the
4.5)
5.
6.
7.
52
Press ZERO to reset the settings to factory defaults ...
rESEt is displayed.
Press TARE ...
SEtPnt is displayed.
If Preset Tare is not enabled, skip to step 7. If it is enabled continue to the next step.
Press UNITS ...
tArE is displayed.
Use this to:
set values for up to 10 preset tares
l
print the values of the preset tares
l
reset all preset tares to factory defaults of 0
l
The following steps describe the procedures.
Press SELECT ...
Edit is displayed.
Press SELECT ...
tArE 1 is displayed. This is the first of the 10 preset tare values you can
set.
Press SELECT ...
The current value is displayed with a flashing right digit.
Press ZERO to accept the displayed value or key in a new value and press
ZERO to accept ...
tArE 1 is displayed.
Press UNITS ...
tArE 2 is displayed.
Repeat steps 4 through
finished ...
Edit is displayed.
6 for tArE 2 through tArE 10. Press TARE when
ZM303 Indicator User Instructions