Enable; Timeout - Avery Weigh-Tronix ZM303 User Instructions

Supervisor menu

Enable

Battery  Enable
Only enable the battery and set the tMout value if the battery has the proper external
shutoff circuitry. If battery use is enabled, setpoint output 3 cannot be used for
setpoints in any application. It is used as a shutoff signal. The ZM-BAT (the optional
D-cell battery pack) made for the ZM303 does not contain the power saving
circuitry.
2.
3.

Timeout

Battery  Enable  Timeout
4.
5.
6.
7.
54
Press SELECT ...
EnAbLE is displayed. Choices are oFF and on. Choose oFF to disable
battery usage. Choose on to enable battery usage.
Press UNITS to toggle between the choices and when your choice is
displayed, press ZERO to accept ...
EnAbLE is displayed.
Press UNITS ...
tMout is displayed. This stands for timeout. Use this to set the length of
time before inactivity of the scale and keypad cause battery power to be
shutoff. Values between 1 and 3600 minutes are valid. This function
only works if the battery has shutoff circuitry.
Press SELECT ...
A numeric entry screen appears.
Key in a value, in minutes and press ZERO to accept ...
tMout is displayed.
This completes the Supervisor menu for General Weighing. Repeatedly press
TARE until the indicator returns to normal weighing mode.
The current weight value is displayed.
ZM303 Indicator User Instructions