Over Divisions; Reset - Avery Weigh-Tronix ZM303 User Instructions

7.
8.

Over divisions

Check  Outputs  Under divisions  Over divisions
9.
10.
11.

Reset

Check  Outputs  Under divisions  Over divisions  Reset
12.
13.
14.
15.
16.
17.
18.
ZM303 Indicator User Instructions
Press SELECT ...
The current value is shown with a flashing right-most digit.
Press ZERO to accept the current value or key in a new value and press
ZERO to accept ...
undrdiv is displayed.
Press UNITS ...
oVErdiV is displayed. Use this to set the number of divisions (0-100)
above the target weight that is still within the accept window.
Press SELECT ...
The current value is shown with a flashing right-most digit.
Press ZERO to accept the current value or key in a new value and press
ZERO to accept ...
oVErdiV is displayed.
Press UNITS ...
rESEt is displayed. Use this to reset the all the checkweigher variables
to the factory defaults.
Press SELECT ...
no is displayed.
Press ZERO to abort the reset or press UNITS ...
YES is displayed.
Press ZERO to reset the settings to factory defaults ...
rESEt is displayed.
Press TARE ...
chEcK is displayed.
Press UNITS ...
bAttErY is displayed. The battery menu is identical in all the
applications. Refer to step
battery.
This completes the Supervisor menu for the Checkweighing application.
Repeatedly press TARE until the indicator returns to normal weighing mode.
The current weight value is displayed.
7.4 Checkweighing application supervisor menu
1 on page 53 for information on setting up the
65