Chapter 4 Menus; Accessing The Menus; Menu Annunciators - Avery Weigh-Tronix ZM303 User Instructions

Menus
4 Menus
Password protected menus are available to configure the indicator and/or view
information.

4.1 Accessing the menus

Follow these steps to access the menus in the ZM303.
1.
2.
3.

4.2 Menu annunciators

The menu structure is made up of menu items, parameters, value entry screens and
lists from which you choose one item. To help you know where you are in the menu,
the bargraph at the top of the display is on while the indicator is in the menus and will
change appearance according to the following rules:
All segments flashing
Center flashing / others solid
Center flashing / others off
Right flashing / others off
34
With the indicator powered up and in normal operating mode, press and hold
F1 ...
Pass is displayed, prompting you to enter the password.
Key in the password for the menu you want and press the ZERO key ...
The first item in the top level of the menu you accessed is displayed.
Use the navigation keys, shown below, to navigate through the menu
structure. The symbols in the chart appear on the bottom of the keys.
Press SELECT/
Press TARE/
bottom item in a menu, then use ZERO/
Press PRINT/
Press UNITS/
Press ZERO/
move up in the menu.
Press F1 to escape and move up in the menu
to move down in a menu
to move up in a menu, except at the
to move left in a menu
to move right in a menu
to accept a value or choice and
This means you are in the menu structure but not
in any of the following screens.
This means you are in a parameter prompt
screen.
This means you are in a numeric entry screen.
Enter a number and press ZERO to accept.
This means you are in a list. Scroll through the
choices with the PRINT and UNITS keys and
press ZERO to accept.
ZM303 Indicator User Instructions
or F1