Dload - Avery Weigh-Tronix ZM303 User Instructions

Menus

4.6.6 Dload

About  Boot  Firm  App  Serial  Option  Enet  Dload
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
42
From EnEt, press UNITS ...
dLoAd is displayed. This stands for download. Under SSEriAL you can
view the serial number of the software application that created the
configuration file. Under dSEriAL you can view the serial number of the
software application that downloaded the configuration file. This is used
for security and licensing purposes.
Press SELECT ...
SSEriAL is displayed.
Press SELECT ...
The 1st half of the serial number of the creating application of the
configuration file is displayed.
Press ZERO to show the 2nd half.
Press F1 ...
SSEriAL is displayed.
Press UNITS ...
dSEriAL is displayed.
Press SELECT ...
The 1st half of the serial number of the downloading application of the
configuration file was downloaded to, is displayed.
Press ZERO to show the 2nd half.
Press F1 ...
dSEriAL is displayed.
Press TARE until About is displayed.
To exit the menu, see Exiting the menus on page 35.
ZM303 Indicator User Instructions