Remote Display Application - Avery Weigh-Tronix ZM303 User Instructions

5.
Below is an example of the minimum weight display. Note the pair of circle annunciators
that are lit.
Below is an example of the maximum weight display. Note that a different pair of circle
annunciators are now lit.

3.7 Remote display application

This section applies if you have the Remote Display application active.
The indicator can be configured to work as a remote display with other compatible
indicators or the GSE 350/355IS.
To use a ZM indicator to operate as a Remote display for a Primary indicator you must
configure settings in the Supervisor menu and in a separate password protected menu.
A remote indicator will display the same information as the primary indicator and
pressing the main function keys (Tare, Select, Zero, Print, and Units) on the remote will
function as if they were pressed on the primary indicator.
If the Remote indicator is connected to a GSE 35xIS Primary indicator, then additional
features and options may be available for use from the remote such as setpoints,
remote inputs, Com port communication forwarding to local devices and analog output
option.
Contact your local Avery Weigh-Tronix representative for information on setting up the
ZM indicator as a Remote or Primary indicator.
ZM303 Indicator User Instructions
Repeat the steps to perform another peak weighment.
3.7 Remote display application
lb
lb
33