Firm And App; Serial - Avery Weigh-Tronix ZM303 User Instructions

Menus
7.
8.

4.6.2 Firm and App

About  Boot  Firm and App
1.
2.

4.6.3 Serial

About  Boot  Firm  App  Serial
1.
2.
3.
4.6.4 Option
About  Boot  Firm  App  Serial  Option
1.
2.
3.
4.
5.
6.
40
Press ZERO to return to the VErSion display.
Press TARE to return to the boot display.
From boot, press UNITS ...
FirM is displayed. This stands for firmware.
Repeat the same pattern of key presses in steps
number and version for the FirM. and APP menu items.
With APP displayed, press UNITS ...
SEriAL is displayed.
Press SELECT ...
The first four digits of the indicator serial number are displayed. Press
UNITS to view the last five digits.
Press TARE to return to the SEriAL display.
From SEriAL, press UNITS ...
oPtion is displayed.
Press SELECT ...
VErSion is displayed. This stands for the software version of the
currently installed option card. This can be useful service information.
To view the version, press SELECT ...
The software version number is shown.
Press ZERO ...
oPtion is displayed.
Press UNITS ...
tYPE is displayed. This stands for the type of option card installed. The
four option cards are: Analog, 802.11g wireless, USB-d, and Current
Loop/RS485/RS422.
Press SELECT ...
The currently installed option card name is displayed.
2 through 7 to view the part
ZM303 Indicator User Instructions