1-35. DV Playback Envelope Waveform Confirmation
(DV Playback compatible model only)
V1/Vmax, V2/Vmax, V3/Vmax ≥ 0.8
SPEC.
TEST POINT
R/P ENV : Refer to item "6. Table of Test Point for each adjustment item."
MODE
PLAY
M. EQ.
Oscilloscope
TAPE
NTSC: VFM3010EDS (DV Color bar)
PAL: VFM3110EDS (DV Color bar)
Click this button
, then go to item "6. Table of Test Point for each adjustment item.".
This confirmation should be performed for only DV playback compatible models shown below.
1. Playback the DV color bar alignment tape.
2. Confirm that the envelope output is within the specification.
3. If it is out of specification, perform the "ENV Waveform Adjustment" and "LISTA Adjustment" again.
MECH-33