Panasonic AJ-SDX900P Service Manual page 27

6. Version-up proceeds until 'INIT' line comes, even though communication error occurs. If a
communication error occurs, the version-up is interrupted after "fw103>INIT" is displayed. In this case
check the rotary switch setting and turn off and on both PC and Camcorder.
7. When it is completed, hit "X" button on the top-right to end the program.
8. Turn off and on the camcorder in order to restart it.
9. Confirm that the software is updated.
<VTR SYSCON>
1. Connect a PC and AJ-SDX900 with an RS-232C cross cable (9P-9P).
2. Set the rotary switch to 5 position.
3. Turn on both PC and AJ-SDX900.
4. Execute 'vsi2312J.exe', and version-up program starts.
5. Click 'Browse...' button and choose a target file.
6. Set other parameters marked with red as shown in the above figure. And click 'Ok(O)'.
End
INF-17