Atmel AT91SAM9G45-EKES User Manual
  1. Manuals
  2. Brands
  3. Atmel Manuals
  4. Motherboard
  5. AT91SAM9G45-EKES
  6. User manual

Atmel AT91SAM9G45-EKES User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
AT91SAM9G45-EKES
....................................................................................................................
User Guide
6481B–ATARM–27-Nov-09

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AT91SAM9G45-EKES and is the answer not in the manual?

Questions and answers

Related Manuals for Atmel AT91SAM9G45-EKES

Summary of Contents for Atmel AT91SAM9G45-EKES

  • Page 1 AT91SAM9G45-EKES ........................User Guide 6481B–ATARM–27-Nov-09...

  • Page 2: Table Of Contents

    Software Controlled LEDs ................. 4-16 4.2.10 Serial Peripheral Interface Controller (SPI) ............4-17 4.2.11 Two Wire Interface (TWI)................... 4-18 4.2.12 SD/MMC Interface ..................... 4-18 4.2.13 TFT LCD with Touch Panel ................4-20 4.2.14 Push Buttons ..................... 4-22 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...
  • Page 3 6.11 Image Sensor - ISI ......................6-8 6.12 Video ..........................6-9 6.13 Display Devices........................6-9 6.13.1 LG TFT LCD LG/PHILIPS..................6-9 6.14 Large LCD Extension ....................... 6-10 Section 7 Schematics .........................7-1 Schematics......................... 7-1 Section 8 Revision History......................8-1 Revision History ......................... 8-1 1-ii AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 4: Introduction

    Figure 1-1. Board Photo ® The Atmel SAM9G45-EKES is a fully-featured evaluation platform for the Atmel SAM9G45-based microcontroller. The evaluation kit allows users to extensively evaluate, prototype and create application- specific designs. The SAM9G45-EKES includes many hardware peripherals such as:...

  • Page 5: Applicable Documents

    NOR Flash Applicable Documents Table 1-1. Applicable Documents Reference Title Comments This document describes the SAM9G45, which is ® part of the Atmel's Smart ARM Microcontrollers. 6438A SAM9G45 Preliminary Datasheet It is available from http://www.atmel.com/dyn/products/product_card. asp?part_id=4596 It is available from...

  • Page 6: Kit Contents

    – One micro A/B-type USB cable – One serial RS232 cable A Welcome Letter Figure 2-1. Unpacked SAM9G45-EKES Unpack and inspect this kit carefully. Contact your local Atmel distributor, should you have issues con- cerning the contents of the kit. AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 7: Evaluation Board Specifications

    We strongly recommend using a grounding strap or sim- ilar ESD protective device when handling the board in hostile ESD environments (offices with synthetic carpet, for example...). Avoid touching the component pins or any other metallic element on the board. AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 8: Power Up

    SAM9G45-EKES. Optionally, if you have a SAM-ICE™, instructions are also given about how to debug the code. We recommend that you backup the “SAM9G45-EKES DevStart” folder on your computer before launching it. AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 9: Recovery Procedure

    The DevStart ends by giving step-by-step instructions on how to recover the SAM9G45-EKES to the state as it was when shipped by Atmel. Follow the instructions if you deleted the contents of the embedded Flash or the NAND Flash and want to recover from this situation.

  • Page 10: Board Description

    The board is equipped with a SAM9G45-CU chip (324-ball TFBGA package) together with the following interfaces or peripherals: DDR2/LPDDR memory interface is connected to 128 MB DDR2-SDRAM memory External Bus Interface (EBI) is connected to three kinds of memory devices (DDR2-SDRAM, NAND Flash and NOR Flash (not populated)) AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 11: Board Interface Connection

    Main power supply (J2) 4.1.3 Push Button Switches Reset, board reset (BP1) Wake up, push button to bring processor out of low power mode (BP2) Right and left click, user push button switches (BP4 and BP5) Joystick (BP3) AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 12: Display Lcd And Leds

    4.2.1 Processor The board features the Atmel SAM9G45-CU 324-ball TFBGA package. This chip runs at a nominal fre- quency of 400 MHz for the core and 133 MHz for the system bus. For more information, refer to the last SAM9G45 datasheet available from http://www.atmel.com/...

  • Page 13: Reset Circuitry

    The chip select NCS0, NCS1 and CS3 are used for NOR Flash, DDR2-SDRAM and NAND Flash mem- ories, respectively. Furthermore, a dedicated jumper can disconnect each of these NCS0, NCS1, and NCS3 signals, making them available for other functions. AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...
  • Page 14 Board Description Figure 4-3. EBI0 - DDR2 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...
  • Page 15 Board Description Figure 4-4. EBI1 - DDR2 + Flash AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 16: Power Supplies

    R1100D series. It is powered by the output of the 3.3 VDC Supply. Note: 1. Corresponding test points (TP1 to TP4, GND) are used with jumpers (JP1.1 to JP7) to permit probing of these voltages. AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...
  • Page 17 Board Description Figure 4-5. Power Supply and Management Power Block AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 18: Debug Interface

    100nF 100nF 100nF 100nF G N D G N D MALE RIGHT ANGLE MALE RIGHT ANGLE C155 C155 100nF 100nF C158 C158 100nF 100nF C160 C160 100nF 100nF 100K 100K 100K 100K PB13 PB12 ADM3202ARNZ ADM3202ARNZ AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...
  • Page 19 USB device High speed and connected to the second UTMI port. One USB high/full speed type standard A connector One USB interface Host/Device Micro AB connector Refer to the SAM9G45 datasheet for detailed programming information. 4-10 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...
  • Page 20 10Base-Tx. The MII and RMII interfaces are capable of both 10Mb/s and 100Mb/s data rates as described in the IEEE 802.3u standard. The signals used by MII and RMII interfaces are described in the table below. AT91SAM9G45-EKES User Guide 4-11 6481B–ATARM–27-Nov-09...
  • Page 21 EMDC: management data clock clock EMDIO: management data EMDIO: management data EMDIO MDIO MDIO input / output input / output RESET# XT1 RESET# XT1 NRST NRST: microcontroller reset NRST: microcontroller reset (25 MHz) (REF_CLK 50MHz) 4-12 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...
  • Page 22 Board Description Figure 4-10. Ethernet Port For more information about the Ethernet controller device, refer to the Davicom DM9161 controller man- ufacturer's datasheet. AT91SAM9G45-EKES User Guide 4-13 6481B–ATARM–27-Nov-09...

  • Page 23: Audio Stereo Interface

    The SAM9G45-EKES includes an AD1981B AC97 SoundMAX® CODEC for digital sound input and out- put. This interface includes audio jacks for MIC input (J9), Line audio input (J8), Headphone line output (J7) and a 2-point speaker output connector (JP15). It is compliant with AC97 Component Specification V2.2. 4-14 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...
  • Page 24 Board Description Figure 4-11. Audio Stereo Interface For more information about the AC97 codec device, refer to the Analog Devices AD1981B controller manufacturer's datasheet. AT91SAM9G45-EKES User Guide 4-15 6481B–ATARM–27-Nov-09...

  • Page 25: Tv-Out Extension

    GPIO or PWM control. LEDs D6 to D8 are software controlled by PIO pins. LEDs D9 to D11 indicate Ethernet traffic and link status. These are automatically managed by on-chip microcontroller hardware. See Section 7.1 ”Schematics” 4-16 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 26: Serial Peripheral Interface Controller (Spi)

    470K 470K e s t p o i n t JP11 JP11 MN14 MN14 (SPI0_MISO) (SPI0_MOSI) C110 C110 (SPI0_SPCK) JP12 JP12 100nF 100nF (SPI0_NPCS0) NRST RESET AT45D321D AT45D321D W RITE PROTECT SERIAL DATAFLASH NORMALLY OPEN AT91SAM9G45-EKES User Guide 4-17 6481B–ATARM–27-Nov-09...

  • Page 27: Two Wire Interface (Twi)

    SD/MMC card slot. The second interface is used as a 4-bit interface (MCI0), connected to a 4-bit SD/MMC card slot. The users must provide their own compatible cards for use with these connectors. Please note that the power is connected to VCC, which is 3.3 volts. 4-18 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...
  • Page 28 Board Description Figure 4-16. SD/MMC0-MMC1 AT91SAM9G45-EKES User Guide 4-19 6481B–ATARM–27-Nov-09...

  • Page 29: Tft Lcd With Touch Panel

    The back light voltage is generated from a TPS61161 boost converter. It is powered directly by the VIN 5 VCC power (the control for the back light voltages is separated from the main board voltages due to the specific voltage requirements of the LCD panel). 4-20 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...
  • Page 30 Board Description Figure 4-17. TFT LCD AT91SAM9G45-EKES User Guide 4-21 6481B–ATARM–27-Nov-09...

  • Page 31: Push Buttons

    All I/Os of the SAM9G45 Image Sensor Interface are routed to connectors J17 Touch screen signals and analog I/O are connected to J18 This allows the developer to extend the features of the board by adding external hardware components or boards. 4-22 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...
  • Page 32 IMAGE SENSOR CONNECTOR C186 C186 C187 C187 C184 C184 10uF 10uF 100nF 100nF 100nF 100nF VDDISI (CTRL1) (CTRL2) PD12 PD13 PA21 PA20 PB31 PB29 PB30 PB28 PB20 PB21 PB22 PB23 PB24 PB25 PB26 PB27 PB10 PB11 AT91SAM9G45-EKES User Guide 4-23 6481B–ATARM–27-Nov-09...

  • Page 33: Configuration

    Two types of jumpers are used on the SAM9G45-EKES board: 2-pin jumpers with two possible settings: – Fitted: the circuit is closed, and – Not fitted: the circuit is open 3-pin jumpers with two possible positions, for which settings are presented in the following tables. AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 34: Jumpers Configuration

    Enables chip select access, Boot on the SPIO_NPCS0 (Serial Data Flash MN14) JP13 Opened Set address A0 low (MN13 Serial EEPROM), enable Boot access. JP14 JP14.1 = Line_Out_L JP14.3 = Line_Out_R JP15 Used to connect a Loudspeaker JP16 Closed DISMDIX (MN22) AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 35: Miscellaneous Configuration Items

    I/O lines of the peripheral set. Each PIO Controller controls up to 32 lines. Each line can be assigned to one of two peripheral functions, A or B. The multiplexing tables in the following paragraphs define how the I/O lines of peripherals A and B are multiplexed on the PIO Controllers. AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 36: Multiplexing On Pio Controller A (Pioa)

    MMCI1 Data4 Ethernet MII VDDIOP0 PA28 MCI1_DA5 ERXCK R.Select MMCI1 Data5 Ethernet MII VDDIOP0 PA29 MCI1_DA6 ECRS R.Select MMCI1 Data6 Ethernet MII VDDIOP0 PA30 MCI1_DA7 ECOL R.Select MMCI1 Data7 Ethernet MII VDDIOP0 PA31 MCI1_CK PCK0 MMCI1_clock VDDIOP0 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 37: Multiplexing On Pio Controller B (Piob)

    PB27 ISI_D7 Image Sensor Data 7 VDDIOP2 PB28 ISI_PCK Image Sensor Data Clock VDDIOP2 PB29 ISI_VSYNC Image Sensor Vertical Synchro VDDIOP2 PB30 ISI_HSYNC Image Sensor Horizontal Synchro VDDIOP2 PB31 ISI_MCK PCK1 Image Sensor Reference Clock VDDIOP2 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 38: Multiplexing On Pio Controller C (Pioc)

    VDDIOM1 PC15 NWAIT VDDIOM1 PC16 VDDIOM1 PC17 VDDIOM1 PC18 VDDIOM1 PC19 VDDIOM1 PC20 VDDIOM1 PC21 VDDIOM1 PC22 VDDIOM1 PC23 VDDIOM1 PC24 VDDIOM1 PC25 VDDIOM1 PC26 VDDIOM1 PC27 VDDIOM1 PC28 VDDIOM1 PC29 VDDIOM1 PC30 VDDIOM1 PC31 VDDIOM1 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 39: Multiplexing On Pio Controller D (Piod)

    General purpose A/D6 VDDIOP0 PD27 PCK1 SPI0_NPCS3 GPAD7 General purpose A/D7 VDDIOP0 PD28 TSADTRG SPI1_NPCS1 USB Plug-ID IDUSB VDDIOP0 PD29 TCLK1 SCK1 MCI1_WP VDDIOP0 PD30 TIOB0 SCK2 Command Power Led VDDIOP0 PD31 TIOB1 PWM1 Command LED1 VDDIOP0 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 40: Multiplexing On Pio Controller E (Pioe)

    PE24 LCDD17 LCDD23 LCD-Blue1 VDDIOP1 PE25 LCDD18 LCD-Blue2 VDDIOP1 PE26 LCDD19 LCD-Blue3 VDDIOP1 PE27 LCDD20 LCD-Blue4 VDDIOP1 PE28 LCDD21 LCD-Blue5 VDDIOP1 PE29 LCDD22 LCD-Blue6 VDDIOP1 PE30 LCDD23 LCD-Blue7 VDDIOP1 PE31 PWM2 PCK1 AC97 External Clock VDDIOP1 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 41: Connectors

    Power Supply Connector J2 Table 6-1. Power Supply Connector J2 Signal Description Mnemonic Signal description Center +5 VCC RS232 Connector with RTS/CTS Handshake Support Connector J11 is the COM1 connector. Figure 6-2. RS232 COM1 Connector J11 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 42: Dbgu

    Table 6-3. RS232 DBGU Connector J10 Signal Descriptions Mnemonic Signal description 1, 4, 6, 7, 8, 9 NO CONNECTION TXD TRANSMITTED DATA RS232 serial data output signal RXD RECEIVED DATA RS232 serial data input signal GROUND AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 43: Ethernet

    Connector J12 is the USB Host connector. Figure 6-5. USB Host type A connector J12 Table 6-5. USB Host Type A Connector J12 Signal Descriptions Mnemonic Signal description Vbus 5v power Data minus Data plus Ground Shield Shield AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 44: Usb Host/Device

    Connector J13 is the JTAG/ICE connector. A SAM-ICE connector is a 20-way Insulation Displacement Connector (IDC) keyed box header (2.54 mm male) that mates with IDC sockets mounted on a ribbon cable. Figure 6-7. JTAG/ICE Connector J13 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...
  • Page 45 CPU. Common ground nSRST RESET Active-low reset signal. Target CPU reset signal Common ground This pin is not connected in SAM-ICE. Common ground This pin is not connected in SAM-ICE Common ground AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 46: Sd/Mmc- Mci0

    Connectors SD/MMC- MCI0 Connector J6 is the SD/MMC connector. Figure 6-8. SD/MMC0 Connector J6 Table 6-8. SD/MMC0 Connector J6 Signal Descriptions Mnemonic Mnemonic RSV/DAT3 DAT0 DAT1 DAT2 Card Detect AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 47: Sd/Mmc- Mci1

    Connector J8 is the Line In connector. Connector J9 is the Line In connector. Connector JP15 is the Speaker Output connector Figure 6-10. Audio Connector J7, J8, J9 Table 6-10. J7, J8, J9 Signal Description Mnemonic Central pin Signal AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 48: Image Sensor - Isi

    Figure 6-11. ISI Connector J17 Table 6-12. ISI Connector J17 Signal Descriptions Mnemonic Mnemonic VCC 3v3 VCC 3v3 Ctrl1 Ctrl2 ISI_MCK ISI_VSYNC ISI_HSYNC ISI_PCK ISI_Data0 ISI_Data1 ISI_Data2 ISI_Data3 ISI_Data4 ISI_Data5 ISI_Data6 ISI_Data7 ISI_Data8 ISI_Data9 ISI_Data10 ISI_Data11 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 49: Video

    Composite video signal output 6.13 Display Devices 6.13.1 LG TFT LCD LG/PHILIPS Connector J24 is the TFT-LCD connector. Figure 6-13. TFT LCD Connector J24 Table 6-14. LG TFT LCD Connector J24 Signal Descriptions Mnemonic Mnemonic VDD 3V3 VDD 3V3 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...

  • Page 50: Large Lcd Extension

    GREEN Data Signal PE24 BLUE Data Signal PE23 BLUE Data Signal (LSB) PE26 BLUE Data Signal PE25 BLUE Data Signal PE28 BLUE Data Signal PE27 BLUE Data Signal PE30 BLUE Data Signal (MSB) PE29 BLUE Data Signal 6-10 AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...
  • Page 51 Table 6-16. Connector J18 Signal Description for a Large LCD Extension Mnemonic Mnemonic AD1XM AD0XP AD3YM AD2YP (0V) (0V) PD25 PD25 PD24 PD24 PD27 PD27 PD26 PD26 PD19 PD19 PD18 PD18 (0V) (0V) (0V) (0V) (0V) +3V3 power source +3V3 power source AT91SAM9G45-EKES User Guide 6-11 6481B–ATARM–27-Nov-09...
  • Page 52 This section contains the following schematics: Top Level view, block architecture of the design Power Supply SAM Processor Bus impedance adaptor Main memory EBI memory MCI & TWI Audio AC97 Serial interfaces Ethernet Video interfaces and LCD extension AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...
  • Page 53 SCALE REV. REV. REV. SHEET SHEET SHEET AT91SAM9G45-EKES AT91SAM9G45-EKES AT91SAM9G45-EKES TOP LEVEL TOP LEVEL TOP LEVEL This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings.
  • Page 54 SCALE REV. REV. REV. SHEET SHEET SHEET POWER LED AT91SAM9G45-EKES AT91SAM9G45-EKES AT91SAM9G45-EKES PB[14..18] POW ER SUPPLY POW ER SUPPLY POW ER SUPPLY This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings.
  • Page 55 SCALE SCALE SCALE REV. REV. REV. SHEET SHEET SHEET AT91SAM9G45-EKES AT91SAM9G45-EKES AT91SAM9G45-EKES SAM9 chip SAM9 chip SAM9 chip SG-BGA-CA89405MF SG-BGA-CA89405MF This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings.
  • Page 56 REV. REV. REV. SHEET SHEET SHEET EBI1_SDA10 AT91SAM9G45-EKES AT91SAM9G45-EKES AT91SAM9G45-EKES RES.ARRAYS-EBI0_EBI1 RES.ARRAYS-EBI0_EBI1 RES.ARRAYS-EBI0_EBI1 This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings.
  • Page 57 SCALE REV. REV. REV. SHEET SHEET SHEET AT91SAM9G45-EKES AT91SAM9G45-EKES AT91SAM9G45-EKES EBI0_DDR2 EBI0_DDR2 EBI0_DDR2 This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings.
  • Page 58 SCALE REV. REV. REV. SHEET SHEET SHEET AT91SAM9G45-EKES AT91SAM9G45-EKES AT91SAM9G45-EKES EBI1_MEMORY EBI1_MEMORY EBI1_MEMORY This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings.

  • Page 59: Mci & Twi

    SCALE REV. REV. REV. SHEET SHEET SHEET AT91SAM9G45-EKES AT91SAM9G45-EKES AT91SAM9G45-EKES MCI & TW I MCI & TW I MCI & TW I This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings.

  • Page 60: Audio Ac97

    SCALE REV. REV. REV. SHEET SHEET SHEET AT91SAM9G45-EKES AT91SAM9G45-EKES AT91SAM9G45-EKES AUDIO AC97 AUDIO AC97 AUDIO AC97 This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings.

  • Page 61: Serial Interfaces

    SCALE REV. REV. REV. SHEET SHEET SHEET AT91SAM9G45-EKES AT91SAM9G45-EKES AT91SAM9G45-EKES SERIAL INTERFACES SERIAL INTERFACES SERIAL INTERFACES This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings.
  • Page 62 SCALE REV. REV. REV. SHEET SHEET SHEET AT91SAM9G45-EKES AT91SAM9G45-EKES AT91SAM9G45-EKES RMII ETHERNET RMII ETHERNET RMII ETHERNET This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings.
  • Page 63 REV. REV. REV. SHEET SHEET SHEET AT91SAM9G45-EKES AT91SAM9G45-EKES AT91SAM9G45-EKES LCD & ISI & VIDEO INTERFACE LCD & ISI & VIDEO INTERFACE LCD & ISI & VIDEO INTERFACE This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings.
  • Page 64 REV. REV. REV. SHEET SHEET SHEET AT91SAM9G45-EKES AT91SAM9G45-EKES AT91SAM9G45-EKES LCD & ISI & VIDEO INTERFACE LCD & ISI & VIDEO INTERFACE LCD & ISI & VIDEO INTERFACE This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings.

  • Page 65: At91Sam9G45-Ekes User Guide

    Section 8 Revision History Revision History Table 8-1. Change Request Document Comments Ref. 6481A First issue. Figure 4-17, ” TFT LCD” updated. 6481B 6833 Section 7.1 ”Schematics” updated. AT91SAM9G45-EKES User Guide 6481B–ATARM–27-Nov-09...
  • Page 66 Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDI- TIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY...
  • Page 67 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Microchip AT91SAM9G45-EKES...

Table of Contents