Important Notes; Safety Notes - Fujitsu FUTRO S5010 Operating Manual

Important notes

Notes Importantnotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.

Safety notes

Note Safetynotes
Please follow the safety notes provided in the "Safety/Regulations" manual
as well as the safety notes given below.
When installing and operating the device, please observe the notes on ambient
conditions in
The device may only be operated up to a maximum height of 3000 m
(9842 ft) (for China only 2000 m (6557 ft)).
Caution, components in the system can get very hot.
The activities described in these instructions must always be
performed with the greatest care.
For system expansions and repairs to the unit, refer to the manual "System
Expansions and Repairs". Some of the activities described in this manual may only
be performed by authorized personnel. Improper repairs may cause danger to the
user (electric shock, fire hazard) or material damage to the unit.
Operate the device only with the casing closed.
Power cable and mains adapter:
The supplied power cable conforms to the requirements of the country in
which you purchased your device. Make sure that the power cable is approved
for use in the country in which you intend to use it.
The mains adapter's power cable should only be connected to a mains
socket if the device is connected.
Do not use the mains adapter for other devices.
Use only the mains adapter which is intended for use with the device,
see chapter
Make sure that the rated current of the mains adapter is not higher than that of
the power system to which you connect the mains adapter.
ON/OFF switches do not disconnect the device from the mains voltage. To completely
disconnect the mains voltage, remove the power plug from the power socket.
Fujitsu
"Technical data ", Page 29
"Technical data ", Page
and the instructions in
29.
Important notes
"Getting started", Page 14.
11