Secure The Printer (Optional); Use The Optional Cable Lock - DataCard CR805 Installation And Administrator's Manual

Secure the Printer (Optional)

This procedure is optional.
You can secure the printer using one of the following:
An optional cable lock (refer to

The bolt-down openings in the bottom of the printer (refer to

on page 10).

Use the Optional Cable Lock

The cable lock is a user-installed feature that does not require special tools to install. The package
contains a cable lock, instructions, and a metal security plate. The security plate is installed in the
printer and is designed to accommodate the T-bar of the cable lock.
The cable lock is available with either a key or combination lock.
If your system includes a laminator, the cable lock can be installed in the laminator
component of the system. Refer to
1.
Prepare the printer by installing the metal security plate:
a.
Tip the printer on its right side.
b.
Locate the security plate receptacle on the
underside of the printer toward the back left
side.
c.
Insert the security plate into the receptacle
with the open end toward the printer.
d.
Insert the T-bar of the cable lock through the
printer opening into the security plate.
2.
Follow the instructions included with the cable
lock to complete the installation.
CR805 Retransfer Card Printer Installation and Administrator's Guide
"Use the Optional Cable
"Use the Optional Cable Lock"
Lock").
"Use the Bolt-Down Openings"
on page A-9.
9