Multi-Hopper System; Electrical Requirements - DataCard CR805 Installation And Administrator's Manual

Multi-Hopper System

23.6 in
598 mm

Electrical Requirements

The power supply is rated as follows:
System Component
Printer
Laminator with L1 only
Laminator with L1, L2,
and impresser
CR805 Retransfer Card Printer Instrallation and Administrator's Guide
28.8 in
732 mm
110–240V/50–60 Hz/1.5 Amp
100–240V/47–63 Hz/2.2 Amp
100–240V/47–63 Hz/6.6 Amp
38.2 in
970 mm
Electrical Requirements
Input
24V/3.0Amp/72W
24V/3.75Amp/90W
24V/6.6Amp/160W
27.6 in
700 mm
Output
A-5