Starting Up The Ip Address Setup Tool (Wi Set) - Sanyo POA-WL11 Operation Manual

4. The main menu screen will appear.
From this main menu screen, you may install and run software necessary for Wireless Imager.

3.2. Starting up the IP address setup tool (WI Set)

1. Click the [Launch the IP address setup tool] icon.
The IP address setup tool for Wireless Imager (WI Set) will be started up.
For details about the IP address setup tool (WI Set), see [4.2. Setting the IP address with WI Set ] in
Chapter 4.
[NOTE] WI Set may not be able to detect Wireless Imager, if the firewall feature in some PC virus
detection program is running. When you use WI Set, disable the firewall feature temporarily.
Chapter 3.
— 21 —
Software CD-ROM