Restart - Sanyo POA-WL11 Operation Manual

Chapter 4. Setting up Wireless Imager

4.3.9. Restart

On the restart screen, Wireless Imager can be restarted. Click the [RESTART] button.
When you changed settings in other page (TCP/IP, Wireless, etc.) but not yet restarted Wireless Imager
unit, you can click [Restart] button to activate the new settings.
When you access Wireless Imager after changing the setting;
Enter the new IP address in the address field of the Browser to access Wireless Imager. You are not
allowed to access with the previous IP address.
— 44 —