Chapter 1. Overview Of Wireless Imager; Advantage; Image Transfer Flow - Sanyo POA-WL11 Operation Manual

Chapter 1.
Overview of Wireless Imager

Chapter 1. Overview of Wireless Imager

1.1. Advantage

1. When multiple persons make presentations, the projector can be shared by changing the
connection destination with the software on Wireless LAN enabled PCs. (Applicable to
IEEE802.11b).
Accordingly, this system offers you a smart meeting style, instead of connecting and disconnecting
RGB cables which has been required so far.
2. Since the projector and personal computer are connected through the wireless system, this
requires no RGB cable connections. As a result, presenters can make the presentation at their
desired position while operating the personal computer.
3. This system uses a screen capture method that directly transfers the screen displayed on the
personal computer to the projector. The system does not have any limitations on application
software like viewer built-in projector. Any application software can be used. Thus, the system can
be utilized in a variety of fields.
NOTE : THIS SYSTEM IS NOT APPLICABLE TO AN APPLICATION SOFTWARE
USING DIRECTX, MS-OFFICE ASSISTANT, AND REPLAYING OF
MOTION PICTURES, SUCH AS DVD.

1.2. Image Transfer Flow

Following the image transfer flow, from capturing of the personal computer screen to projection of
images.
1. The screen displayed on the personal computer is captured at real-time with the special software
(WI Client).
2. The captured image data is transferred to Wireless Imager through the wireless LAN (network).
3. Wireless Imager outputs the transferred images to the projector via Digital RGB (DVI) in real-time.
4. The projector will project the screen displayed on the personal computer.
Projector
Wireless Imager
3. Digital RGB output
4. Projection
2. Data transfer
— 10 —
1. Capturing image