Sanyo POA-WL11 Operation Manual page 4

Safety Instructions
All the safety and operating instructions should be read before the unit is operated
● Follow the instructions in the Owner's Manual for the projector and other peripherals when you install or
operate this unit.
● Disconnect the power plug of projector and other connected devices from the AC outlet when you install
or remove this unit.
Attempting to install or remove the unit while the power is connected to the AC outlet may cause electric
shock and damages to the unit.
● Do not attempt to disassemble, modify, or repair the unit.
Failure to comply with this caution may cause fire or electric shock, and damages to the unit.
● Operating the unit when the unit is emitting excessive heat, fumes, or strange odor may cause fire or
electric shock.
Disconnect a power supply plug from the outlet.
● Do not drop the unit or subject it to other mechanical shocks.
The internal parts may become damaged and may cause electric shock, fire or cause the unit to
malfunction.
● Before operating this unit, make sure that no electromagnetic interference is produced.
Operation of any radio equipment may interfere the functionality of some medical devices (such as
pacemaker).
● Do not touch the unit with wet hands.
Doing so while the power supply plug of a projector or other devices are connected to the AC outlet may
cause electric shock.
● Do not operate cellular phones too close to this unit. (Within 20 cm).
Doing so may cause this unit to malfunction.
SANYO Electric Co., Ltd. assumes no responsibility for the loss or damage of data
or damage of the compouter caused by use of this product.
Safety Instructions
NOTE
— 4 —