Advanced Setup - Miscellaneous - Sanyo POA-WL11 Operation Manual

Chapter 4. Setting up Wireless Imager

4.3.7. Advanced setup - Miscellaneous

On Miscellaneous setup screen of the advanced setup, desired location names are set to distinguish
Wireless Imager when using multiple Wireless Imager units.
Parameter
Location Set each location name. Location names set in this field are respectively displayed
on the connect menu of WI Client.
If the contents you have set on this page are correct, click the [APPLY] button.
The screen prompting you to restart Wireless Imager will appear. If no other configuration change is
necessary, click the [RESTART] button to restart Wireless Imager. The changed settings will take effect
upon Restart.
[NOTE] To return the contents you have set to the previous settings, click the [REFRESH] button
before pressing [APPLY] button.
To return the settings to the factory default settings, click the [Restore Factory Default
Settings] button. Only Miscellaneous items are then returned to the factory default
settings.
Description
— 42 —